Scottsbluff Auto Repair

You might remember a hit TV sitcom that was set in a bar, a place where "everybody knows your name."  The idea, of course, is people feel more comfortable where they aren't just another customer among many; they're special because their relationship goes back a few years.   That comfortable relationship can extend to professionals you deal with, too.  Think of your accountant, your dentist, your doctor.  Most people try to stick with the same person or firm in those businesses.  They have grown to know their work over the years and they've learned to trust their professionalism, the quality of their work and their track record.    Ideally, you should have that same relationship with your automotive service facility, like your friends here at Twin City Auto. You may have tried several facilities over the years until you found one that did good work at a reasonable price.  The longer your relationship with your service facility, the better the peop ... read more

When you slow down at stoplight, your vehicle's idle should be smooth as silk.  But what happens when the engine is missing or idling roughly? That's your engine's way of telling you, "Hey, I've got something wrong with me and if you don't get someone to find out what it is, I may not start the next time you turn the key." You can help your service facility if you can describe the problem in detail.  Here's a list of things to make a note of: When is the problem happening, when the engine is cold or when it's been running for a while? Does the rough idling occur when I'm accelerating or when I'm going at a steady speed? Does it happen at high speeds?  Does it happen low speeds? Does it happen at both? Make sure you describe the problem in as much detail because it will help a technician diagnose the problem. One of the first things they'll check is how the spark plugs are firing.  Modern iridium plugs are supposed to last a long, long time.  But they CAN even ... read more

So your vehicle won't start.  What's the first thing that comes to mind?  Battery dead? Starter motor worn out? Out of gas?  Well, those are all reasons that make sense.  But your vehicle may be refusing to start because one of its computers is being warned that to do so might damage it.  Here's how that works. You have lots of computers in your vehicle.  They need to know the status of things so there are several sensors monitoring various things going on.  These sensors send information to the computers that adjust the fuel and air mixture so you don't waste fuel.  They know when things aren't quite right and prevent you from starting your engine if that's going to damage it.  Other sensors make sure the coolant is the right temperature, check to see you are not polluting the air and make sure other electronic components are performing their tasks correctly. Here's an example of a sensor doing its job.  Your engine needs oil to lubric ... read more

There's a gauge that many vehicles have that says RPM on it.  And there are a lot of people who either don't pay any attention to it or don't even know what it is. Here's why it's a good gauge to know about. It's called a tachometer, and that "RPM" label means it is measuring how many revolutions per minute (RPM) the engine is turning.  Automotive experts know that a vehicle's engine can be damaged if it turns too fast (revving too high) or too slowly ("lugging" the engine). A tachometer (sometimes called a tach) is almost a "must-have" gauge for vehicles with a manual transmission; the driver has to manually change gears; the tach helps the driver know when revolutions are in the optimal range. Some say you don't need a tachometer if you drive a vehicle with an automatic transmission. It's true that most drivers of automatics don't even look at it.  But there are times when paying attention to the tach can help you prevent an expensive repair. Here's a good example.&nbs ... read more

Things we don't expect happen to our vehicles. And let's face, no one really wants to spend money on an unexpected repair. But if you are putting off going to your vehicle repair facility because you're dreading bad news, you might just be putting off some good news. There was one minivan driver who'd had the same van for years and never had a problem with the power sliding doors.  Then one day, the electrical switches in the door pillars stopped working.  The key fob would still open them, but the door switches wouldn't do a thing. Of course, the van driver feared the worst: an electrical problem, a major computer failure, mice chewing up the wires.  So, he put off going into the repair facility for a couple of months.  One day, it was time for his regular oil change and the service advisor asked him if there was anything else going on with the van.  The owner mentioned the door problem but said he didn't want to spend a fortune on it. He waited for his van, a ... read more

We've all been through it. The vehicle ahead of us kicks up mud, slush, snow or salt on our windshield and we can't see a thing.  And not being able to see a thing when we're driving?  Not a good thing. Debris on a vehicle's glass can be blinding when driving directly into the sun.  And other things can ruin visibility: scratches on the glass, fogged windows, mineral deposits.  So lets make one thing clear:  Your windows.  Here are some tips. Number one rule, don't use abrasives on glass. That means no gritty cleaners that are made for metal.  Avoid at all costs those dark green abrasive pads on some kitchen sponges that are made to clean metal pots and pans UNLESS the manufacturer specifically says they can be used on glass. Use the appropriate cleaner for the substance that's being cleaned off. Special automotive glass cleaners are available, and your Twin City Auto service advisor can make recommendations. Vinegar can work wonders. Sometimes you'l ... read more

When automakers first came out with cruise control, it was a real luxury item.  The older cruise controls used a mechanical vacuum system but it worked.  Well, some of the time.  Now days, cruise control is all electronic, thanks to computers.  It's reliable and a real convenience on long trips.  Cruise control is offered on most vehicles and standard on a lot of them.  Because it's electronic, when it breaks, it's usually some electronic component.  Your vehicle's cruise can be the victim of a blown fuse. Or your vehicle's speed sensor, which—not surprisingly—measures your vehicle's speed, can also stop working.  And that will cause your cruise to stop cruising.  Vehicles with cruise control also have a built-in feature that, when the brakes are applied, turns off the cruise.  With electronic cruise control, that happens thanks to the brake pedal switch, and if a problem develops in that switch, the cruise might not work. T ... read more